Motorcycle Locks For Maximum Security

 

Safety first, people always say. When it comes to a helmet, and gear, you may be fully covered -like wearing leather motorcycle pants, motorcycle riding jackets, and motorcycle rain gear to make the riding of your vehicle safer. But what if the locks of the motorcycle itself? Motorcycles are expensive, heavy, and have the potential to be stolen. That is why quality matters over quantity and getting a good lock.

Different Types of Locks

However, many people will tell you to use one method, whether it be a fork lock, a disk lock, or maybe even a chain. They are all good ideas to keep the smaller thieves, and criminals of opportunity at bay. But some go well beyond the norm, and they are the ones you need to prepare for. But here is a tip, keep those locks and chains off the ground. This reduces the amount of leverage it. You can further hinder or prevent a thief's attempt by adding a Killswitch or alarm. Both would be quite clever. After all, a motorcycle is valuable.

Add a spanner to a thief's plan by getting yourself an ABUS Granit DetectoXPlus 8077. Made of very special hardened steel, it is user-friendly, so no worries about installation. Furthermore, any tampering will trigger the sensor and let out a major racket. The lock even reminds you of certain sounds to lock your motorcycle, and if it is dark, no worries! The key has a built-in light allowing you to see in the dark - which may occur quite frequently as a motorcyclist.

For an additional lock, you can always go for a HelmetLokGenII 4- digit lock. It prevents you from having to lug around all your heavy gear in fear of getting stolen. This lock allows you to secure your gear at the bike itself. Although it may not be bolt-cutter proof (however in all fairness, few locks are). It certainly can prevent multiple crimes of opportunity that are a direct threat to your motorcycle and your equipment.

Another lock that may just suit your fancy is the Gorilla Automotive 9000-2R Motorcycle Alarm with Two Transmitters. It is a power lock, having three powerful sensors that can trigger a siren alarm, and remote control to lock and unlock it. To install it takes a mere half an hour, making life easy, simple, safe, and quick when it comes to the security of your motorcycle.

You can consider the OnGuard 8019L Mastiff Quad Chain Lock used for A bit more of an old-school approach. Made of hardened reinforced steel, breaking this lock will be incredibly difficult, as it is built and designed in an overkill mode. The more security, the better one could say.

Or you could go for Superman's weakness, the Kryptonite NY Fahgettaboudit. Sounds close to telling thieves forget-about-it, Which is a beef-sized chain used to lock up your motorcycle. With a high-security disk lock and asymmetrical chain, no one will be accessing your motorcycle anytime soon.

Apart from security, if you are interested in adding leather biker vests or waterproof motorcycle pants (to protect you from the rain), why don't you head over to Wicked Stock today? After all, you want to make sure you are fully equipped to safely riding a motorcycle while enjoying it at the same time!

Do not forget to check our Facebook, Twitter, and Instagram for more updates.

Content is originally posted at https://wickedstock.com/motorcycle-locks-for-maximum-security/

Everyone Needs A Motorcycle Tool Kit!

 

Have you ever been stranded on the side of the road when you were just riding on your motorcycle a few minutes ago? Did you need just one little tool to get your bike moving again, but you didn’t have it with you? Your plans can take a sharp turn at any moment, especially if you are riding your motorcycle through snow, rain, or hot desert wind. You never know when you are going to need a pick-up service to come and help you, and there is no guarantee that they will come to get you when you need them.

We do understand why an inexperienced rider would be hesitant to always carry a tool kit with them around. It's just another thing they must carry in their backpack or store in their small compartment. But theirmen's motorcycle vest and men's textile motorcycle pants are not the right places to store tools for a long time.

Instead of waiting for help to come to you, you should be able to take care of certain problems by yourself. Protecting yourself and caring for your motorcycle is vital to be a good motorcycle rider. So that is why it is important for all motorcycle riders to always have a motorcycle tool kit with them.

 

A motorcycle tool kit will not have everything you need to solve every single problem, but it's better than not having it at all. You wouldn't travel anywhere without men's leather biker pants to keep you safe from the elements or without your leather motorcycle gloves to protect your hands from friction when revving your motorcycle engine, so why would you leave without your motorcycle tool kit?

Responsible motorcycle riders always keep their kids with them in the event of an emergency on their part, so they do not have to wait hours for someone else's help. Another reason to have a motorcycle tool kit is if they meet someone who is stranded on the side of the road.

They can help their fellow motorcycle rider get out of a jam or stay with them until their help arrives.

So now that you know why a motorcycle tool kit is so important, it's time to create a motorcycle tool kit of your own. But before you start adding tools to your kit list, we want you to check these 5 Motorcycle Tools You May Not Have Used, and decide whether these tools are necessary to be added or not.

 

Which Items And Tools Do You Need In Your Tool Kit?

There are three ways to acquire a full motorcycle tool kit: by building on yourself, by purchasing a premade one and adding your special tools, or by purchasing a deluxe tool kit with everything you need.

No matter what option you choose, here are some of the most vital Tools & instruments that every rider needs in their tool kit:

 

●       A container that holds everything you need and is small enough to fit inside the storage compartment of your motorcycle. Storage space is very limited on a motorcycle, compared to trucks and cars so you start building a motorcycle tool kit by purchasing the holder or tool roll kit first. Make sure it fits inside your motorcycle's storage compartment

●       A flashlight with batteries

●       Small roll of duct tape

●       A rag to wipe your hands

●       A tire pressure gauge, especially for long trips

●       A multimeter

●       Zip ties

●       A puncture repair kit

●       Pliers

This list is not complete, but the items above are vital and should be in every single tool kit.

Where To Buy Motorcycle Tool Kits And Gear?

Now that you know how important a toolkit is and what items you need, where should you buy a toolkit from? We know the answer! You should buy a kit from Wickedstock.com. But that's not the only thing you should buy from this website. Wicked Stock has hundreds of articles on motorcycle gear. No matter what your style is, you'll find the gear that will make you look as stylish as ever while keeping you safe and protected.

You can also head over to the Instagram, Facebook, and Twitter account to check out their news clothes and find out when their gear and kits are going on sales.

Content is originally posted at https://wickedstock.com/everyone-needs-a-motorcycle-tool-kit/

Learning Parts of a Motorcycle

 

If you are interested in motorcycles but don’t know where to start, we're here for you! Learning about the different parts of a motorcycle is important, but sometimes having to learn it from others is preferably avoidable, especially when it comes to the beginner's knowledge – parts of the bike. Here is a simple overview of each part of a motorcycle and a summary of the role they within the motorcycle.

 

 Hand Controls

The first part you should know is the clutch lever. It is usually located in the very front of the handgrip on the left side along the handlebar. You need to use your left hand to pull the clutch in towards the grip. The clutch lever is the control that separates the power from the motor itself to the rear wheel on the bike.

The next part is the throttle, which is built into the right-hand grip of the motorcycle. Place your right hand, which should have on motorcycle leather gloves, on the grip and twist it. The more you twist the grip, the more fuel is delivered into the motor. Gripping and twisting the throttle produces a higher amount of power and higher RPMs inside the motor – and the sound could scare pedestrians as they walk by.

Foot Controls

The rear brake pedal is the brake pedal on the right side of the footpeg. To use it, press the ball of your foot down on the pedal. Doing this creates braking power directed towards the rear wheel. The more force you use, the stronger the braking power is going to be, so be careful! If you plan on speeding down the highway, be sure to wear your mens leather motorcycle jacket or your motorcycle rain gear.

After the rear brake pedal is the gear shifter. Many automatic motorcycles and scooters do not have this control, but some do. They are normally located on the front left-hand side of the footpad on a motorcycle. A rider can control the rear brake wheel press their foot down or up to make the gear shift. Keep in mind, the gear shifter only works by going through each gear. No skipping can occur, and you have to let the lever reset itself into the middle position before you can try changing gears again.

 Controls – Electronic

Signal lights controls are normally found above the handgrip on the left-hand side. This area is very easy for motorcyclists to reach. To the signal on, move the control to the left or to the right to indicate which way you want to go. Now there is no need to swing your arms when a simple button can indicate where you are about to turn to the people behind you.

Hazard lights – These lights are normally a triangular symbol, but not all motorcycles have them. They have been incorporated into the newer, larger motorcycles, but if you own an older or a smaller motorcycle they won’t be there.

Headlight – To show other vehicles on the street that you are approaching, you can use the headlights control which is normally found on the left control module. There will be a toggle that switches between the low and high beams. The low beam allows for a regular amount of light, and the high beams are for isolated dark roads where you need to be able to see further. Your brake light will be on the rear of the motorcycle, and should automatically light up when you apply the brake controls.

You should also have an emergency kill switch. This switch is a toggle switch that stops or starts the flow of electricity to the engine. However, it will not turn off any other electronics on the bike. It is normally found on the right electronic control module, which is directly beside the handgrip. It has the indicators for off or on or certain symbols.

 

There you have it! Some of the most important and common components on a motorcycle. Be sure to take your time to study these motorcycle parts and understand where everything is. But it is good to know what goes where before you take that beauty out for a spin. Additionally, if you are living or decided to visit developing countries, apart from learning about the motorcycle parts, one should learn the Motorcycle Safety Tips for Riding in a Developing Country.

Before you take your motorcycle out for a spin, check out Wickedstock.com to find high-quality motorcycle gear at low prices! Study the car parts while you are shopping. This site always has great sales on biker vest patches. Take a look at Wickedstock’sInstagram, Facebook, and Twitter as well to see how another style the new gear they just bought.

Content is originally posted at https://wickedstock.com/learning-parts-of-a-motorcycle/